Synthesizer Sequencer Sampler Mastering

Synthesizer

16 tracks (1 x 5-voice polyphonic track + 15 x 4-voice paraphonic or mono tracks)*
full-control single grand unified engine with 18 versatile synthesis algorithms
per voice; 2 oscillator models + 1 versatile sine super/sub-oscillator
17 low-aliasing oscillator models + up to 256 user-defined oscillators or samples
Virtual Analog, FM, Super Saw, AM, RingMod, x0x percussion, time warp, more
Wavetable synthesis with 2 wavetable oscillators per voice, 8 built-in wavetables, custom wavetable import
multi-mode filter per voice (16 types)
extensive per-voice FX; simultaneous distortion (2 types), saturation, pre/post filter bit crushing, down-sampling, 4 x multi-FX sends
2 x AEG, 1 x FEG, 7 x fixed LFOs per voice
170+ patch presets
2 synthesized timbres (or 32 samples) per track with unique per-step "DNA" dynamic generative patch cross-breeding
special attention for emulating vintage digital, analog and organic sounds and behaviors
extensive, complex sound design capabilities with 100+ parameters per timbre
intelligent patch randomization for infinite patch variations
can be used as standalone 16-part sound module

Sequencer

16 songs x 16 tracks x 16 patterns x 16 steps
fast workflow; create new intricate song ideas in minutes
polyrhythms, arpeggio and x0x-style patterns
extensive generative abilities with "replicable" random events
per-step conditionals, 100+ step modifier types, probabilities
content-aware intelligent pattern and chain randomization
use scales, modes, chord types and inversions, w/o music theory
fast diatonic playing/programming mode
chord recognition from external MIDI connected gear
pattern chaining, pattern muting conditions
micro-timing, swing and groove control
live punch & dub recording with optional quantization
song mode with per-fragment transformation, automation, programmable DJ FX / looper
send sync and MIDI to control connected gear (CC, patch changes, banks, etc.)
export songs, dry & wet stems as .WAV and .MID files for use in DAW / hybrid workflow
undo functionality

Sampler

2m4s total across 2 banks @ 44.1kHz 8-bit mu-law (~12-bit effective) / 22.05kHz 16-bit**
reconstructive up-sampling to 44.1kHz 16-bit
512 total samples: 2 x banks x 16 user kits x 16 slices
dedicated 3.5mm line-input with optional direct mic-level sampling***
vocoder; imprint voice on audio
skip-back "always recording" sampling of past audio
digital sample import via MIDI connection
compatible with Teenage Engineering OP-1 / OP-Z drum kits****
real-time time stretching and pitch shifting
auto-slicing, manual slice, chop, re-arrange samples
add new oscillators, one-shots and loops
multi-sampled instrument support
random multi-sample variation triggering
use live audio as an oscillator model
re-sample internal synthesizer
automatic space management and optimization
undo functionality

Mastering & FX

per-voice 3-band parametric EQ (cut/keep/boost and frequency) with aural exciter mode
per-voice upward or downward compressor/transient shaper
per-voice FX shimmer via osc 3
4-bus multi-send/receive routable side-chaining and gating
pre-FX send high pass filter
3-band master compressor with 4 algorithms
OTT ("over-the-top") compressor with full controls
vinyl and colored (tape) noise floor effects
mid/side processing with stereo width boost and bass monofy controls
extensive programmable DJ effects (noise, drone, HP/LP filter, buffered audio, stutter)
2 x "DJ FX" dynamic resampling loop buffer @ 44.1kHz 16-bit stereo
global pro reverb with damping, pre-delay, modulation controls and early reflection
global chorus or comb/phaser
global 2 x delay units

* polyphony restrictions may apply depending on DSP resources
** only one of two 1m2s sample banks may be used per song
*** direct unamplified mic-level sampling only recommended for recording basic voice samples and vocoder input
**** first 16 samples only, "Teenage Engineering" and "OP-1" are registered trademarks of Teenage Engineering AB

Pocketable Connectable Playable

Pocketable

66 g / 2.4 oz (SE) 69g / 2.5 oz (Pro)
73mm/2.9"(W) x 77mm/3"(L) x 9mm/0.35"(H slab) 31mm/1.22"(H slab+knob)
USB-C rechargeable 1000/1200mAh (SE/Pro) internal battery
9h+/10.5h+ (SE/Pro) battery life continuous play, 100% DSP usage, wireless off
physical on/off switch
sturdy ABS-plastic enclosure with textured back
protective case included

Connectable

3.5mm stereo audio-out with sync pulse out via breakout cable (cable included with Pro)
3.5mm stereo audio-in for sampling*, effects and live mix of external gear
3.5mm type-A MIDI in/out**
USB-C port (charging-only)***
Wireless MIDI in/out over Bluetooth® LE
Bluetooth® LE Host ("Central") mode; directly connect wireless MIDI controllers and regular Bluetooth LE computer keyboards
Wooveconnect web interface****; song/sample transfer, WAV export, firmware update
Wooveconnect Android app
Expander mode; turn any MIDI-capable keyboard or controller into an workstation & synth

Playable

live mode with 16 triggerable scenes, programmable automation and re-triggering effects
mute and unmute tracks on the fly
16 tactile micro switches for live playing and improvisation
hall sensor for touchless note accenting, tremolo, vibrato and filter effects while playing
unique dynamic key-mapping for live melody improvisation
process 2 channels of audio-in as part of your song or live performance
integrate external audio into synthesis engine
endless live sound mangling possibilities and rhythmic effects
extensive connectivity via Bluetooth® allows for customized control, playing and performance setups

* sampling in mono, mic-level capable for close-up voice & vocoder only
** switchable between either MIDI in or MIDI out (but not both), 3.5mm Type A TRS to DIN cable included with Pro
*** USB-C charger or charging cable not included
**** requires MIDI connection + WebMIDI enabled browser (e.g. not compatible with any iOS browser)