- Home
- Model comparison
OG 2023
- Firmware 3.0 compatible
- 3.5mm MIDI OUT
- 1000mAh battery (9h+)
- 68 g / 2.4 oz
- SLA 3D printed enclosure
- Sync OUT breakout cable
Ultimate value
- Firmware 3.0
- 3.5mm MIDI IN/OUT switchable
- 1000mAh battery (9h+)
- 66 g / 2.4 oz
- Injection moulded ABS enclosure + laser marking
Swiss army knife
- Firmware 3.0
- 3.5mm MIDI IN/OUT switchable
- 1200mAh battery (10h30m+)
- 69 g / 2.5 oz
- Injection moulded ABS enclosure + laser marking
- Sync OUT breakout cable
- Stereo to 2x mono splitter cable
- 3.5mm MIDI Type A to female DIN cable
- Voice/vocoder microphone
- Expander sticker sheets x2
You may also be interested in...
- 4. Eq.Fr EQ Mid Frequency Point (under Panning & EQ page)
Anything around this value is considered the "mid" frequency (2/bS/Eq.Md).
- 16. L.C.ho hold duration for cutoff frequency LFO (under Filter page)
Specifies the hold duration in milliseconds for which the LFO should hold the LFO's sampled value.
- 6. P.2.Pn Pitch to Pan (under Panning & EQ page)
Use note pitch as in input for placing voices in the stereo field.
- Real-time pitch and time warping (under Sampler & vocoder)
The Woovebox' algorithm deliberately leans into this use of pitch shifting and time stretching for creative uses.
- 10. bt.Cr bit crush (under Glob Gobal page)
Two types of bit crushing can be selected; pre- or post-filter/clip distortion.