You may also be interested in...

• Example (under Inversions)
• Basic interface navigation (under The very basics)

  Short pressing the value knob again (while still holding write) will cycle to the next item in the menu.

• 2/bS + value Recovery mode (under Boot modes)

  To do so, hold the 2/bS key and value knob pressed in while powering up the device.

• 4/Ar + value Factory reset (under Boot modes)
• 3/Ld + value Delete all samples (under Boot modes)

  Please note that the following procedure will cause all sample data on the device to be lost!