- Dynamics Page
- r.buS
1. r.buS Receive Bus
Specifies which bus should be used for the signal that will control the volume attenuation for this track. Four busses are available, as well as a 'faKE' setting that fakes a pulse on every first quarter note without any input signal. The latter is quick way to mimic the "pumping" effect found in many dance tracks. Busses may be selected simultaneously.
You may also be interested in...
- Rezzonator: "Sequencer Page Tutorial" (under Reviews, videos, tutorials)
- 2nd octave (under Mapping)
- 6/Sn Increase capacitive button sensitivity (under Boot modes)
By keeping 6/Sn pressed while turning the device on, sensitivity of the capacitive buttons can be temporarily increased.
- Live Jamming (under Live mode)
You can configure your patch on the 'Pich' (pitch) page; set Live Glide (LLGL) under 3/Ld to 'on'.
- The very basics (under Full documentation, guide and tutorial)