- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity
- Filter page
- L.C.de
14. L.C.de depth for cutoff frequency LFO
Specifies the strength by which the LFO should affect the filter.
Negative values invert the waveform, causing, for example, a square wave to be 0/"off" and then 1/"on", as opposed to the being 1/"on" and then 0/"off" (or similarly a sine, triangle or saw wave ramp down, rather than up).
You may also be interested in...
- Terms, Conditions and Warranty (under Shop)
- 12. Au.Ho Auto-Pan LFO Hold (under Panning & EQ page)
Specifies the hold time for the auto-pan LFO in milliseconds.
- 10. d.V.St Drone Volume End (under DJ page)
Volume of the drone (sine wave) tone at the end of the fragment.
- 13. L.C.Wv Waveform for cutoff frequency LFO (under Filter page)
'Sqr'; square wave (starts at 1 for a half a cycle, then switches off for half a cycle).
- 5. L1.Wv LFO 1 Waveform (under Amplitude page)
'SinE'; sine wave (starts at 0 / 90 degree phase, ramping up).
- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity