You may also be interested in...

• Gallery
• Skip-back sampling (resampling) (under Sampler & vocoder)

  Please note that the "skip back" context menu option may be used only once per sampler session.

• 5/Ki Boosted screen brightness / LED test / firmware version (under Boot modes)

  The device will display the firmware version it is running, until the boot sequence is complete.

• 3/Ld + value Delete all samples (under Boot modes)

  Please note that the following procedure will cause all sample data on the device to be lost!

• 4/Ar + value Factory reset (under Boot modes)