- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity
- Amplitude page
- rLS.2
12. rLS.2 Amplitude Envelope Generator Release Oscillator 2
Release defines the time it takes (in milliseconds) to ramp down from sustain level to 0. Release stage of the envelope generator is entered upon note off.
You may also be interested in...
- Terms, Conditions and Warranty (under Shop)
- Advanced (under How to approach)
Many of the same things you are familiar with in other grooveboxes or DAWs, are possible on the Woovebox.
- MIDI Patch Changes (under Connecting other gear; MIDI, Sync, and audio pass-through)
Please note that the patch number is 1-based and 0 is 'off' (no patch change for this pattern).
- Turning off Wooveconnect CC messages (under Connecting other gear; MIDI, Sync, and audio pass-through)
Device mirroring is off by default, unless the device was booted up with Bluetooth MIDI enabled.
- Analog sync (under Connecting other gear; MIDI, Sync, and audio pass-through)
Note that enabling 'Sync' without using the breakout cable, may cause a faint clicking noise.
- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity