- Guides, tutorials and docs
- Learning the Woovebox
- The very basics
- Quick start guide and video
- Tempo and BPM
- Tracks
- Patterns
- Live pattern recording
- Conditional triggering and modification
- Chords
- Arpeggios
- Scales and modes
- Genres
- Patches and Presets
- Sound design
- Paraphonic parts
- Multi-instrument mode
- Risers, fallers, sweeps & ear candy
- Live mode
- Song mode
- Full song writing
- Sampler & vocoder
- Sidechaining, gating, ducking and compression
- Mastering
- Lo-fi & vintage analog and digital emulation
- Randomization
- Hall effect sensor playing
- Advanced techniques
- Undo
- Boot modes
- MIDI, Sync and connecting other gear
- Remote control expander mode
- Wireless MIDI
- Battery and charging
- Hardware quirks and limitations
- Understanding DSP load
- Looking after your Woovebox
- Firmware updates
- Looking after your Woovebox
- Replacing the battery
Replacing the battery
Your Woovebox was designed to put minimal stress on the chosen battery chemistry, and as such the rechargeable battery should last the lifetime of the device with minimal capacity degradation.
If however the battery, for whatever reason, requires replacing, and you are a skilled person (e.g. technician), please contact us to walk you through the proper procedure, as opening up your Woovebox (and reassembling it) requires a special care due to the compactness and tight tolerances of the device. Irreparable damage to components is likely if the procedure is not observed.
Once safely opened and disconnected, the battery itself is relatively easy and cheap to replace. You will find information on the battery type, model and connector type for your specific Woovebox hardware version under the battery itself on the PCB.
You may also be interested in...
- Woovebox SE (under Model comparison)
- 12. rLS.2 Amplitude Envelope Generator Release Oscillator 2 (under Amplitude page)
Release stage of the envelope generator is entered upon note off.
- Low Frequency Oscillators (LFOs) (under Sound design)
A hold time (in milliseconds) may be specified to sample & hold the LFO for the specified duration.
- Spectral resolution optimizer (under Understanding DSP load)
'FuLL'; forces full spectral resolution allocation for the track, preventing loss of resolution at all times.
- 3. n.V.St Noise Volume Start (under DJ page)
- Guides, tutorials and docs
- Learning the Woovebox
- The very basics
- Quick start guide and video
- Tempo and BPM
- Tracks
- Patterns
- Live pattern recording
- Conditional triggering and modification
- Chords
- Arpeggios
- Scales and modes
- Genres
- Patches and Presets
- Sound design
- Paraphonic parts
- Multi-instrument mode
- Risers, fallers, sweeps & ear candy
- Live mode
- Song mode
- Full song writing
- Sampler & vocoder
- Sidechaining, gating, ducking and compression
- Mastering
- Lo-fi & vintage analog and digital emulation
- Randomization
- Hall effect sensor playing
- Advanced techniques
- Undo
- Boot modes
- MIDI, Sync and connecting other gear
- Remote control expander mode
- Wireless MIDI
- Battery and charging
- Hardware quirks and limitations
- Understanding DSP load
- Looking after your Woovebox
- Firmware updates